Stillilokar
Vöruyfirlit

                /USV-I is a combined pre-setting and shut-off valve designed for installation in the flow pipe. It incorporates flow limitation so that it can be set for the required maximum flow in the riser.<br/><br/>
USV-I is a combined pre-setting and shut-off valve designed for installation in the flow pipe. It incorporates flow limitation so that it can be set for the required maximum flow in the riser.

USV-I
                /The USV-M is a shut-off valve designed for installation in the return pipe. <br/><br/>If manual balancing is not satisfactory, in terms of noise problems on the radiator valves or irregular heat distribution between risers, an USV-M valve can be upgraded into an automatic USV-PV balancing valve.<br/>
The USV-M is a shut-off valve designed for installation in the return pipe.

If manual balancing is not satisfactory, in terms of noise problems on the radiator valves or irregular heat distribution between risers, an USV-M valve can be upgraded into an automatic USV-PV balancing valve.
USV-M
                /The automatic balancing valve USV-PV maintains constant differential pressure across a riser independently of available pressure in the system. This ensures proper heat distribution between different risers and eliminates flow noise.<br/><br/>USV-PV can be set to control the differential pressure between 0.05 bar to 0.25 bar (5 kPa to 25 kPa). The PV controller is factory pre-set to 0.1 bar (10 kPa).<br/>
The automatic balancing valve USV-PV maintains constant differential pressure across a riser independently of available pressure in the system. This ensures proper heat distribution between different risers and eliminates flow noise.

USV-PV can be set to control the differential pressure between 0.05 bar to 0.25 bar (5 kPa to 25 kPa). The PV controller is factory pre-set to 0.1 bar (10 kPa).
PV Controller for USV-M
                /USV-M and USV-I are supplied in a set-pack with internal or external thread. If an external thread is chosen a threaded or welded nipple can be supplied as an accessory.
USV-M and USV-I are supplied in a set-pack with internal or external thread. If an external thread is chosen a threaded or welded nipple can be supplied as an accessory.
USV set

Fréttir